Given that the front section of the spring is longer, this has a much more profound effect on RC height.
pretty sure the short side is front of the axle on s-trucks?
also, why are you trying to raise the RC?
Sorry about that...was a long day
. I meant to say the front section is shorter, and I raised the front spring eye to bring up the the IC not RC....what a herp derp post haha.
For those of you using stock springs, these are the sliders I used.
http://www.speedwaymotors.com/Camaro-Leaf-Spring-Sliders,60313.htmlThe rear spring eye is 1.5"+.000/-.005 from my measurements (slightly oval). The camaro spring sliders have the necessary width (2.5") and height to accommodate the roughly 2" o.d. but come with a 1.625" bushing. I just turned them down to 1.505" and pressed them in with some '609' loctite.
