Blazer Schustaffel

Nah, stock dimmer off the column. I'll need to drill out one of the holes since they've all been filled.

Why did you fill all the holes,I realize it is in the male nature to do this,but not to your dash!lol

Most of the holes were fouled up.. dents around them & whatnot. It'll be easier to have them filled & then make 2 holes (1 big for the lights & 1 about 7/16 for the heater's fan switch).

Ahh........I see,makes sense.

Glad you are using switches that go with the dash rather then trying to make stock work.
I'll let you know about the perf metal.

The pull type light switch I've got goes to the '76 pontiac & the dash is '63 ford.. I was thinking about just tossing the s10 light switch up under the dash until I get the pull type switch to work.

The pull type light switch I've got goes to the '76 pontiac & the dash is '63 ford.. I was thinking about just tossing the s10 light switch up under the dash until I get the pull type switch to work.

I'm still a fan of the old pull type switches,guess it goes with the age!

I wish cars were the way they were pre-1974... After '74 cars really started to suck (there are a few exceptions.. but very few).

I wish cars were the way they were pre-1974... After '74 cars really started to suck (there are a few exceptions.. but very few).

Yup.

Jason,BBC stuff pretty cheap.
http://usar.racingjunk.com/category/1376/Other/post/1639775/FALL-HOUSECLEANING-PARTS-PARTS-PARTS.html

Hmm.. wonder what the specs are on that Erson roller cam...

I did some work on the truck. Took a few pix. I'll post them up when I get home tomorrow from work.. I've been beat all wknd.

I ordered up a rotating assembly ah-la-cart off ebay. Got a set of H rods, pop-up pistons, cast rings & a new 1pc crank.

Did you check you paypal?

Yes I did. I sent you a PM over at the Planet.

Got the dash in & started getting my carpet in, too. Gauge cluster fit fine before the bondo.. after, it doesn't want to go back in. I may end up making a different cluster, which I think I want to do anyways. I made brackets to hold the bottom of the dash were the original was held. One of the brackets I cut, drilled & rivited my E-brake handle to. On w/ the pix..

More pix..

More pix..

Dash looks good. What's the boot for?

Dash looks good Jason.

Thanks. Boot's for the shifter.

(look at first page)

Dash looks good. What's the boot for?

You didn't really ask that did you.....................messin with ya!